Also available: NDS 5" Channel Drain Kit - Plastic Grate (Each)     NDS 864G Pro Series 5" x 1 Meter Deep Profile Channel Kit (Pallet of 50)

5" Pro Series channel drains also come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

Features

• Kit include channel, grates, one end cap and one end outlet
• 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
• Structural foam polyolefin light traffic channel grate
• Open surface area 25.12 square inches per foot
• 32.91 GPM per foot
• UV inhibitors
• Recommended for medium-duty pneumatic tire traffic.
• Autos and light trucks less than 20 mph
• Class B Load Rating: 61-175 psi
• Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
• End cap/knock-out end and outlet fitting simplifies assembly and installation
• End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
• Bottom outlet fits 3" & 4" Sewer & Drain Fittings
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Also Available: NDS 864G Contractor (4 Pack) Channel Drain Kit - Plastic Grate NDS864_BX     NDS 864G Pro Series 5" x 1 Meter Deep Profile Channel Kit (Pallet of 50)

5" Pro Series channel drains also come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

Features

• Kit include channel, grates, one end cap and one end outlet
• 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
• Structural foam polyolefin light traffic channel grate
• Open surface area 25.12 square inches per foot
• 32.91 GPM per foot
• UV inhibitors
• Recommended for medium-duty pneumatic tire traffic.
• Autos and light trucks less than 20 mph
• Class B Load Rating: 61-175 psi
• Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
• End cap/knock-out end and outlet fitting simplifies assembly and installation
• End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
• Bottom outlet fits 3" & 4" Sewer & Drain Fittings
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Also Available:  NDS 5" Channel Drain Kit - Plastic Grate (Each)    NDS 864G Contractor (4 Pack) Channel Drain Kit - Plastic Grate NDS864_BX

5" Pro Series channel drains also come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

Features

• Kit include channel, grates, one end cap and one end outlet
• 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
• Structural foam polyolefin light traffic channel grate
• Open surface area 25.12 square inches per foot
• 32.91 GPM per foot
• UV inhibitors
• Recommended for medium-duty pneumatic tire traffic.
• Autos and light trucks less than 20 mph
• Class B Load Rating: 61-175 psi
• Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
• End cap/knock-out end and outlet fitting simplifies assembly and installation
• End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
• Bottom outlet fits 3" & 4" Sewer & Drain Fittings
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Also Available: Contractor (3 Pack) Channel Drain Kit - Galvanized Grate NDS864GMTL_BX     Contractor (42 Pack) Channel Drain Kit - Galvanized Grate NDS864GMTL-42           

5" Pro Series channel drains with galvanized metal grate. Come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

Features

• Kit include channel, grates, one end cap and one end outlet
• 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
• Galvanized Metal Grate
• Recommended for medium-duty pneumatic tire traffic.
• Autos and light trucks less than 20 mph
• Class B Load Rating: 61-175 psi
• Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
• End cap/knock-out end and outlet fitting simplifies assembly and installation
• End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
• Bottom outlet fits 3" & 4" Sewer & Drain Fittings
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Also Available: NDS 5" Channel Drain Kit - Metal Grate (Each)     Contractor (3 Pack) Channel Drain Kit - Galvanized Grate NDS864GMTL_BX

5" Pro Series channel drains with galvanized metal grate. Come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

Features

• Kit include channel, grates, one end cap and one end outlet
• 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
• Galvanized Metal Grate
• Recommended for medium-duty pneumatic tire traffic.
• Autos and light trucks less than 20 mph
• Class B Load Rating: 61-175 psi
• Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
• End cap/knock-out end and outlet fitting simplifies assembly and installation
• End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
• Bottom outlet fits 3" & 4" Sewer & Drain Fittings
• See Technical Specs • Product Brochures & Specifications for installation recommendations

Also available: NDS 5" Channel Drain Kit - Metal Grate (Each)     Contractor (42 Pack) Channel Drain Kit - Galvanized Grate NDS864GMTL-42 

5" Pro Series channel drains with galvanized metal grate. Come in pre-assembled kits to decrease installation time. They act as perimeter drains, quickly removing water from hardscapes and directing it away from building structures. A bottom outlet is built into each channel section.

Features

• Kit include channel, grates, one end cap and one end outlet
• 39 3/8" long deep profile polypropylene channel drain with mechanical interlocking joint
• Galvanized Metal Grate
• Recommended for medium-duty pneumatic tire traffic.
• Autos and light trucks less than 20 mph
• Class B Load Rating: 61-175 psi
• Create a channel as long as you need, or reduce to lengths as short as 4" for smaller, interlocking sections
• End cap/knock-out end and outlet fitting simplifies assembly and installation
• End outlet fits 3" Sewer & Drain Pipe and 4" Sewer & Drain Fittings
• Bottom outlet fits 3" & 4" Sewer & Drain Fittings
• See Technical Specs • Product Brochures & Specifications for installation recommendations

3.99" Deep Neutral Dura Slope Channel

Features

• NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
• "N" sections sections are non-sloped and used to extend the legnth of the system
• Each channel section is molded of gray structural foam polyethylene with UV inhibitors
• 4” inside diameter with a 2” radius bottom
• 3.99" Deep Neutral Dura Slope Channel
• • • One end connects to DS-090N, DS-224 End Cap or DS-227 End Outlet
• • • One end connects to DS-090N, DS-091, DS-224 End Cap or DS-227 End Outlet
• LeveLoc™ re-bar supports with integral protruding knob
• • • Levels channel and grips re-bar
• • • Requires fewer accessories
• ProFit™ locking system
• • • Locks grate to integral frame
• • • Supports product during installation
• DuraLoc™ integral joint lock
• • • Prevents joint movement during installation
• • • No extra clamps or screws needed
• Interlocking tongue and groove joints
• Bottom outlet on each channel section
• 0.7% built-in slope

3.99" to 4.34" Deep Dura Slope Channel

Features

• NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
• "N" sections sections are non-sloped and used to extend the legnth of the system
• Each channel section is molded of gray structural foam polyethylene with UV inhibitors
• 4” inside diameter with a 2” radius bottom
• 3.99" to 4.34" Deep Dura Slope Channel
• • • 3.99" end connects to DS-090N, DS-224 End Cap or DS-227 End Outlet
• • • 4.34" end connects to DS-091N, DS-092, DS-224 End Cap or DS-227 End Outlet
• LeveLoc™ re-bar supports with integral protruding knob
• • • Levels channel and grips re-bar
• • • Requires fewer accessories
• ProFit™ locking system
• • • Locks grate to integral frame
• • • Supports product during installation
• DuraLoc™ integral joint lock
• • • Prevents joint movement during installation
• • • No extra clamps or screws needed
• Interlocking tongue and groove joints
• Bottom outlet on each channel section
• 0.7% built-in slope

4.34" Deep Neutral Dura Slope Channel

Features

• NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
• "N" sections sections are non-sloped and used to extend the legnth of the system
• Each channel section is molded of gray structural foam polyethylene with UV inhibitors
• 4” inside diameter with a 2” radius bottom
• 4.34" Deep Neutral Dura Slope Channel
• • • One end connects to DS-091, DS-224 End Cap or DS-227 End Outlet
• • • One end connects to DS-092, DS-224 End Cap or DS-227 End Outlet
• LeveLoc™ re-bar supports with integral protruding knob
• • • Levels channel and grips re-bar
• • • Requires fewer accessories
• ProFit™ locking system
• • • Locks grate to integral frame
• • • Supports product during installation
• DuraLoc™ integral joint lock
• • • Prevents joint movement during installation
• • • No extra clamps or screws needed
• Interlocking tongue and groove joints
• Bottom outlet on each channel section
• 0.7% built-in slope

4.34" to 4.67" Deep Dura Slope Channel

Features

• NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
• "N" sections sections are non-sloped and used to extend the legnth of the system
• Each channel section is molded of gray structural foam polyethylene with UV inhibitors
• 4” inside diameter with a 2” radius bottom
• 4.34" to 4.67" Deep Dura Slope Channel
• • • 4.34" end connects to DS-091N, DS-091, DS-224 End Cap or DS-227 End Outlet
• • • 4.67" end connects to DS-093, DS-224 End Cap or DS-227 End Outlet
• LeveLoc™ re-bar supports with integral protruding knob
• • • Levels channel and grips re-bar
• • • Requires fewer accessories
• ProFit™ locking system
• • • Locks grate to integral frame
• • • Supports product during installation
• DuraLoc™ integral joint lock
• • • Prevents joint movement during installation
• • • No extra clamps or screws needed
• Interlocking tongue and groove joints
• Bottom outlet on each channel section
• 0.7% built-in slope

4.67" to 5.00" Deep Dura Slope Channel

Features

• NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
• "N" sections sections are non-sloped and used to extend the legnth of the system
• Each channel section is molded of gray structural foam polyethylene with UV inhibitors
• 4” inside diameter with a 2” radius bottom
• 4.67" to 5.00" Deep Dura Slope Channel
• • • 4.67" end connects to DS-092, DS-224 End Cap or DS-227 End Outlet
• • • 5.00" end connects to DS-094, DS-224 End Cap or DS-227 End Outlet
• LeveLoc™ re-bar supports with integral protruding knob
• • • Levels channel and grips re-bar
• • • Requires fewer accessories
• ProFit™ locking system
• • • Locks grate to integral frame
• • • Supports product during installation
• DuraLoc™ integral joint lock
• • • Prevents joint movement during installation
• • • No extra clamps or screws needed
• Interlocking tongue and groove joints
• Bottom outlet on each channel section
• 0.7% built-in slope

5.00" to 5.34" Deep Dura Slope Channel

Features

• NDS Dura Slope™ is a 6 5/8” wide, 48” long trench drain system with a built-in slope of 0.7%.
• "N" sections sections are non-sloped and used to extend the legnth of the system
• Each channel section is molded of gray structural foam polyethylene with UV inhibitors
• 4” inside diameter with a 2” radius bottom
• 5.00" to 5.34" Deep Dura Slope Channel
• • • 5.00" end connects to DS-093, DS-224 End Cap or DS-227 End Outlet
• • • 5.34" end connects to DS-094N, DS-095, DS-224 End Cap or DS-227 End Outlet
• LeveLoc™ re-bar supports with integral protruding knob
• • • Levels channel and grips re-bar
• • • Requires fewer accessories
• ProFit™ locking system
• • • Locks grate to integral frame
• • • Supports product during installation
• DuraLoc™ integral joint lock
• • • Prevents joint movement during installation
• • • No extra clamps or screws needed
• Interlocking tongue and groove joints
• Bottom outlet on each channel section
• 0.7% built-in slope